Free Shipping
Fast Delivery
Great Prices
Rush Production Available

Foil stamping and embossing

Foil stamping and embossing are the two finishes that make a hardcover look expensive fastest. The first lays a metallic layer on the cover, the second presses the paper in or out. Below you can read how they work and how to supply a file that works.

Foil stamping

In foil stamping a thin metallic foil is pressed onto the paper with a heated die. Where the die touches the paper, the foil stays behind. The result is a crisp, genuinely metallic shape that you cannot imitate with ink.

The foil colours we carry as standard are gold, silver, copper, black, white and red. Matt gold and matt silver are possible too, and they look quieter than the glossy version.

Embossing

In embossing the paper itself is shaped. There is no ink and no foil, only relief. That can go two ways:

  • Embossing: the shape comes up. You feel the letters standing out above the paper.
  • Debossing: the shape is pressed into the paper. This works beautifully for a logo or a small motif.

Embossing works best on paper with some texture and thickness. On smooth, thin paper the effect is barely visible. Combining foil and embossing in one pass is called foil embossing and gives a raised, shiny shape.

What does and does not work

  • Keep lines at least 0.5 mm thick. Thinner than that and the foil fills in or the line breaks up.
  • Keep text at least 8 point. Smaller becomes illegible, certainly in a serif face with fine hairlines.
  • Keep two elements at least 0.5 mm apart, otherwise they run together.
  • Large solid areas over roughly 20 square centimetres can come out uneven. An outline then works better than a solid shape.
  • Gradients and screens are not possible. Foil and embossing only know on or off.

How to supply the file

Supply your cover as two layers in the same PDF, or as two separate PDF files at exactly the same size:

  1. The normal print in colour, without the foil shape.
  2. The foil or embossing shape as pure black (100 per cent black) on white, in vectors, exactly where it has to go.

Name that second layer or file clearly, for example foil_gold or emboss. Do not put the shape in your colour file as a spot colour, because then we cannot tell whether it should be an extra colour or a die.

Distance to the edges

A die needs room. Keep foil and embossing at least 10 mm from the board edge and at least 10 mm from the hinge groove. Running across the spine is possible, but we advise against it for embossing, because the relief flattens in the spine fold.

Lead time and cost

A die has to be made for foil and embossing. That costs money once and about five working days extra. On a reprint with the same design we use the existing die, so those costs and days fall away. In a run of one copy foil is rarely worth it, because the die cost then falls on a single book.

Effect on your sizes

Foil and embossing change nothing about the size of your cover sheet. The results from the spine width calculator still apply. You do have to allow for the safe zone above.

Let us have a look

Send in your cover design and we will tell you which elements lend themselves to foil or embossing and which are better left in ink. Get in touch.